When making a lot of boost and generating globs of power in a 2JZ engine heat is a huge factor to Engine Spark. Now we have another option besides Ignition boxes to add to stock coils. The IGN1A Coils pack a huge punch in a small package. IGN1a coils are commonly known as smart coils due to the power spark they produce without the need to run an Igniter.
KV85 are the 8.5mm wires we like to call our street wires capable of excessive of 1200+hp
Coil wires sold in set of 6 wires.
Coil Bracket NON VVTI: Click Here
Coil Bracket VVTI: Click Here
IGN1A Coils: Click Here
If you choose we do offer this as a complete kit Bracket, Coils, and Magnacore 8.5mm Premium Plug Wires as a complete kit.
The IGN1A coils are compatible with all aftermarket ECUs on the market. Follow your aftermarket ECUs wiring to set up correctly.
No more need for ignition amplifiers and aftermarket ignition boxes. Say good buy to those stock-expensive 2JZGTE coils.
Magnecor worked with the makers of the IGN1A manufacture to produce the most powerful and consistent wire to transfer the most spark energy to your plugs. So many other wire company wires have failed to keep up with the amount of Mj these coils produce. Don't cheat yourself with cheap wire sets or build your self kits that won't deliver the performance of your powerful IGN1A Coils.
WIRE SPECIFICATIONS:
Magnecor's KV85 Competition (8.5mm) and R-100 Racing (10mm) Race Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over an insulated ferromagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high-strength aerospace-grade silicone rubber, and its single-layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot spots that occur near over-the-limit heat sources.
The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees C) and up to 1,000 degrees F (540 degrees C) for a short burst of 3 minutes. The R-100 10mm jacket has a service heat resistance of 700 degrees F (380 degrees C) and up to 1,200 degrees F (650 degrees C) for a short burst of 3 minutes. Even if limits are exceeded, the silicone rubber will retain its insulating ability until wires are removed from the engine.
Magnecor Race Wires are primarily designed and constructed to be used in applications where it is essential to prevent the possibility of ignition wires compromising engine performance. Modern race engines, modified street engines, overheating-prone LPG conversions, and stock street engines which rely on electronic devices to control the function of either or both the ignition and fuel systems are prone to interference from all other spiral conductor ignition wires sold through performance parts outlets, none of which can provide proper suppression for EMI, particularly if a high-output ignition system is used.
We always recommend the use of our Race Wires for any stock or modified late-model street engine that is electronically managed, however, most other modified or street engines can also use our Race Wires to improve ignition performance
NOTE: Resistance on cables is 2200 ohms/ft +/- 10%